Mold remediation cost
Mold Remediation Cost in Gettysburg, PA
Most homes pay $1,200 to $3,800 for professional mold remediation. Use the calculator for a range that fits your home, then get a price in writing.
Cost calculator
Estimate your mold job.
Pick what matches your home. The range updates as you go, and your picks come with you to the estimate form.
Estimated range
$500 to $2,500
Includes containment, HEPA air filtration, removal of moldy materials, cleaning and drying.
Get my exact priceA planning range, not a quote. Your price comes in writing after a site visit. Rebuild work such as new drywall and paint is quoted separately.
Mold remediation means containing the area, removing moldy materials, cleaning and drying what is left, and fixing the moisture that caused it. National cost guides put the typical job at $1,200 to $3,800, or about $10 to $30 per square foot. Where your home lands depends mostly on how big the area is and where it is.
Typical mold costs
| Work | Typical range |
|---|---|
| Mold remediation, most homes | $1,200 to $3,800 |
| Per square foot | $10 to $30 |
| Small area, 10 to 100 sq ft | $500 to $2,500 |
| Bathroom | $500 to $2,000 |
| Crawlspace | $1,500 to $4,000 |
| Part of a basement or attic | $1,500 to $6,000 |
| Whole basement or attic | $6,000 to $15,000 |
| Heating and cooling ducts | $2,000 to $10,000 |
| Whole house | $15,000 to $30,000 |
| Mold inspection | $300 to $1,000 |
| Each air or surface sample | $200 to $350 |
Ranges come from current national cost guides (Angi, HomeAdvisor and HomeGuide, checked October 2026). They are planning numbers, not a quote.
What changes the price
| Factor | Typical effect on price |
|---|---|
| Size of the area | The biggest factor. A wall section is a small job, and a whole basement or attic means more containment, removal and drying. |
| Where it is | Crawlspaces and attics are tight and hot, which adds time. Plan on roughly $300 to $1,000 more than the same area in a basement. |
| Materials removed | Moldy drywall, insulation and carpet that have to come out add labor and disposal, often $300 to $1,500. |
| Hidden mold | Mold inside walls or ductwork means opening things up to reach it, and duct work is priced separately. |
| Inspection and testing | An inspection runs about $300 to $1,000, and each lab sample adds about $200 to $350. |
What the price includes
- Plastic containment around the work area, so the rest of the house stays clean.
- A HEPA air scrubber, a machine that filters spores and dust out of the air, running during the job.
- Removal and bagging of moldy materials that cannot be cleaned.
- Cleaning, HEPA vacuuming and drying of framing and hard surfaces.
- A plain explanation of the moisture source and how to keep the area dry.
Putting back what was removed, such as new drywall, paint or flooring, is usually quoted separately.
Ways to keep the cost down
- Act early. A wall section caught in the first few weeks is a fraction of the cost of a whole basement.
- Dry anything that gets wet within 24 to 48 hours, which the EPA says keeps mold from growing in the first place.
- Clean small spots yourself. The EPA says areas under about 10 square feet on hard surfaces are usually a homeowner job.
- Fix the moisture source, or you may pay for remediation twice.
Cost questions
How much does mold remediation cost?
Most homes pay $1,200 to $3,800, and national cost guides put typical work at $10 to $30 per square foot. Small areas can be $500 to $2,500, and a whole basement or attic can reach $6,000 to $15,000.
How much does a mold inspection cost?
A professional mold inspection usually costs $300 to $1,000, with a national average near $690. Each air or surface sample sent to a lab adds about $200 to $350.
Does homeowners insurance cover mold remediation?
It depends on your policy and the cause. Many policies help when mold results from a sudden covered event, such as a burst pipe, and exclude mold from long term leaks, humidity or flooding. Check your policy and talk to your agent before work starts.
Is the estimate free?
Yes. The estimate is free and there is no obligation. Request your free estimate.
Have another question about mold, testing or selling a home? See all mold questions and answers.
Mold problems solved right.
Request a free, no pressure estimate from a local Gettysburg mold specialist.